High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging problem for owners. From the desired temperature to their favorite light level, guests are more likely to return for another stay when they can customize their room to match their preferences. However, providing these functions using old technology wastes a lot of energy. For instance, there are plenty of issues with the old card key switches. Guests can put any card within the old switches, or they may ask for more than one card. Even when hotel desk refuses to offer more than one card to a guest, she/he might claim to have lost the card.
The standard old technology of hotel card switch. Additionally there is a large amount of over consumption of lights and AC energy due to things running even when guests aren’t within their rooms, and this could cause a monetary loss for that owner. Obviously, no hotel owner would like to prohibit guests from possessing a comfortable stay, nor do owners expect guests to get in a dark or cold hotel. No one is to blame. Both guests and hotel owners have the authority to fulfill their interests.
Some hotel owners think if they separate the AC from the main network, less energy is going to be consumed, while some think that motion sensors are definitely the solution. However, these approaches forget to resolve the situation. The AC is easily the most energy-consuming device of, and motion sensors could be nightmares given that they only function according to movement detection, which means the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company provides the best answer for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its capability to detect human presence in a room. This ceiling-mounted sensor has numerous options, together with a PIR motion sensor, an easy harvest sensor, 2X digital inputs, infrared emitters suitable for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the brand new means for hotel economical technology. By installing this door sensor on the entrance to a room, connecting it to the Energy Servant’s digital input, and programming the logic lines, the situation of room occupancy is completely resolved.
The subsequent logics can be defined with this sensor to manage room energy with no discomfort for guests:
Logic 1: When there is any movement inside the room, the occupancy mode is going to be on.
Logic 2: When the main door is opened and closed, a flag will activate for one minute to ascertain if there exists movement in room. If no movement is detected after 1 minute, the program will activate energy-saving mode. This can be valuable in situations whenever a guest enters the space briefly. In energy-saving mode all lighting is off except for a nightlight, which stays on for three hours in the event there exists another guest getting a nap. Also, the AC is definitely not switched off, but its temperature will likely be decreased by 2 degrees. This can help save energy as time passes.
Logic 3: In the event the energy-saving mode is enabled and no movement is detected for longer than 3-5 hours, the nightlight and AC is going to be switched off automatically. It is additionally easy to define lower temperature levels for your AC. In addition, the vitality Servant can change the AC on/off if this recognizes that a balcony window/door is open. All of this requires is adding a magnetic contact connected to the balcony window/door and programming the required smart decision. The lighting harvest sensor helps save energy by wscgid balcony lights off if there is enough sunlight.
Another practical and beneficial ability of this sensor is its built-in thermostat, that helps retain the right temperature constantly. This is very important to keep furniture fresh and intact. Also, in hot spots and whether or not the room is empty for some time, humidity and bad smells is not going to become a problem within the room. This sensor could be programmed to alter AC to dry mode if the room temperature reaches or exceeds 28-30C degree. This may happen several times during the day if required. An identical performance can be programmed in cold spots to avoid mold.
Another choice with this smart system is TV control. If the hotel supplies the guest having a room tablet, she/he has the capacity to control the room’s TV with it. This sensor was set up in 20 rooms within the Fairmount Blue Mountain Hotel in Sydney. The result was considerably enhanced energy management and many satisfactory comments from guests who enjoyed their luxurious remain at this hotel.
TIS offers the chance to meet both hotel owners and guests interests and desires with just a few items and then in by far the most power efficient way possible. For more information or to schedule a consultation, contact us at www.tiscontrol.com