Jewlery Photography Part 2
In my last article, I went on the difficulties of photographing jewelry and how difficult it is to get a regular feel and look. One thing that made the largest difference initially was using a specific lighting tent. This tent measured about 17″ x 17″ x 17″ and was foldable, so very very portable from spot to place. They have LED lighting stitched in and four different color backdrops. But this wasn’t the one thing I needed. Although it provided a good foundation to photograph, there was other items I found it necessary to do. So with Nikon P610 Charger, I went to my client’s jewelry store to set up again. As mentioned before, the tent made a big difference and provided a foundation to function from, but there are other elements I discovered created a huge impact also.
Here’s a run down of what I did so to acquire consistent images each time. Firstly, I set my camera to manual mode. In this way I could specifically ensure nothing would change shoot to shoot. My white balance was adjusted accordingly, and I made a note of my settings for future use, including how far back my camera was from your tent etc. I actually took a photo using my iPhone to record this create for future use. Secondly, I used a macro tube extension set. This machine enabled me to get really close to every piece in order to capture all the detail as possible. The advantage of using an extension set is I was able to input it in my zoom lens and also have the camera further back therefore i could access the tent easier minus the camera being in the way. Now due to extension set, I came across another problem. My depth of field was dramatically affected and that i had the issue of just one portion of the piece being sharp, with the remainder away from focus. I really were required to fiddle together with the settings to remove this as best I could possibly, so a very high f stop number was utilized, and of course this contributed to the shutter being open for extended.
The tripod was essential. As was a remote shutter release control i purchased. This resulted in a lot better stability and eliminated your camera shake. The very last thing I ensured was i photographed in RAW format to ensure that I had the best image to work with. I had been set along with the results of my images were a great deal better. They 86dexmpky the standard the thing is in top professional shoots naturally, nonetheless they were certainly suitable to get a small jewelry store in town. It was one of many toughest projects I actually have completed in my photographic life. I had to adjust so lots of things to get the desired results, and my usage of Lightroom afterwards played a crucial role in developing the photos. Because my create became consistent, my development settings also were consistent and enabled me to use the identical setting to each photograph. This is consistency at its finest.