Water Damage Restoration – What Is It? It is the process of repairing a house or property to its pre loss condition. Damage to the property could be because of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. There are two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) as well as the RIA (Restoration Industry Association) that recommends standards for water damage and mold restoration. The S500 damage due to water guide is the benchmark tool which is used by companies focusing on restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the foremost and the most important element of water damage and mold restoration. The assessment needs to be correct in order that the right response can be taken. In restorating the injury caused by water, technicians and also the insurance providers must work together and understand what is damaged and how to go about restoring the injury. Identifying the origin in the damage, documentation of damage, and accurate estimates are mandatory for any proper water damage restoration. Categorization relies on the contamination amounts of the water source. The categories are highlighted below
Category 1 – This can be water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This can be water which includes some contaminants like water coming from a dishwasher, washing machine or toilet with urine.
Category 3 – This really is water that is certainly highly unsanitary and is capable of doing causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.
Decontamination and Drying – Right after the evaluation is done, the process of drying and decontaminating begins in the site. Based on the extent of damage, damage caused because of water can be classified into 4 types. Class 1 Damage- When loss is fixed to some small area and much less water has become absorbed by materials. This brings about slow evaporation rate. Class 2 Damage – When the damage would be to the complete room and carpet area. Class 3 Damage – Once the entire area is saturated with water and Class 4 Damage – when there are many deep saturation pockets. Decontamination and drying is a key stage in Water damage and mold restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments must be used. Decontamination needs to be done if contamination continues to be detected in the region. Decontamination may be performed for the whole area or in specific pockets where contamination has been detected.
Monitoring and Completion – Monitoring the restoration procedure for damage caused as a result of damage is critical to achieve the desired results. One has to be proactive during the monitoring process. Checking if the drying equipment is setup properly, assessing when the personnel involved are qualified to do the job and checking if the equipments have been in working order inwtsy all part of the monitoring process. Necessary steps are to be taken if anything wrong is spotted during the monitoring process. The complete process of water damage and mold restoration would be considered complete just once the humidity, temperature and the moisture content is really as per industry standards. Upon finishing of water damage restoration process, the drying equipment can be removed.